top of page

New-Build Snagging in Port Talbot: Handover Checklist for Baglan & Margam

Writer: Leighton Sims
Leighton Sims
Oct 11
2 min read

A handover appointment is exciting, but it can also pass quickly. If you are buying a new-build home in Port Talbot, Baglan, Margam or nearby, a structured inspection can help you document visible issues without relying on memory or a few hurried photographs.

This practical checklist covers common things to look at. It is not a substitute for a full professional inspection, and it does not mean any particular developer or development has these defects.

1. Doors, frames and weatherproofing

Try internal and external doors where access is permitted. Check whether they open, close and latch as intended; look for damaged finishes, poorly aligned components and incomplete sealing at exterior openings. Photograph the whole opening before taking close-ups.

2. Windows and glazing

Look for damaged glazing, incomplete perimeter finishes and evidence that windows open and close correctly. Check accessible handles and vents. Safety glazing, ventilation and any specialist requirements should be assessed against the applicable specification and regulations rather than by appearance alone.

3. Kitchens, bathrooms and plumbing

Examine accessible sanitaryware, taps, waste fittings and visible sealant for leaks, damage and incomplete finishes. Note any limitations if the home has not been commissioned, services are isolated or the developer has restricted testing.

4. Walls, ceilings, decoration and joinery

Inspect surfaces under normal viewing conditions for incomplete decoration, poor joints, damage and unfinished carpentry. A photographic snag list should explain each issue, not just say 'poor finish' with no location.

5. Outside the house

Check accessible paving, thresholds, fencing, drainage details, garden levels and external finishes. These areas are easily overlooked when buyers focus on kitchens and bathrooms. Conditions, construction stages and access restrictions can limit what can be inspected.

6. Record each issue separately

Write down the location, take a clear overall photograph and a close-up, and explain what needs attention. Keep copies of the report, dates and your communications with the developer. One issue per report entry makes it easier to discuss and track.

A real example from our reports

The extract below shows how South Wales Snagging Co records a door-related defect, with a photograph, observations and a recommended action. It is an anonymised example from a separate inspection, not a claim about a Port Talbot property.

Anonymised genuine snagging report showing an external door weatherproofing issue

Should you inspect before or after completion?

A pre-completion inspection can be helpful where the developer permits independent access. A post-completion inspection allows you to check the home after you have the keys. The appropriate option depends on access, timing and your circumstances.

For buyers around Port Talbot, we provide photo-based visual snagging inspections and clear reports to help raise findings with developers. We cannot guarantee discovery of hidden faults.

South Wales Snagging Co — Helping homeowners take control.

 
 
 

Recent Posts

See All

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page